1. Fits Like Pants, Not Overalls
Finally, pants that ride on your waist. Isn't this where you want to wear your pants?
2. Adjustable Belt Closure
Helping to make REAXTION™ fit like pants, to transfer weight to your hips instead of your shoulders, and to keep the added length and fullness in the seat under control. The pants are secured with an attached belt with an adjustable high-temp polymer buckle. With this feature, you may find that you don't need suspenders to hold your pants up!
3. AXTION™ Seat (Patent Pending)
When you bend your knees, the revolutionary REAXTION™ pants allow for the added length and fullness you need in the seat. Not only can you step up with complete mobility, but when you kneel your knees are directly over the knee pads without any twisting of the leg. When you try on a pair, you'll immediately appreciate just how dramatic this difference is.
4. AXTION™ Knee (Patent Pending)
Horizontal pleats built into the shell and corresponding darts in the AXTION™ liner on the front of each leg provides extra length where you need it for stepping up, sitting down, kneeling, or crawling. The fronts of the legs are wider than the back to provide more fullness over the knee where you want it and less bulk under the knee where you don't. Side seams are rolled toward the back of the legs keeping them out of the primary abrasion area. Together with the AXTION™ seat and liner, this system allows you to bend your knees with complete mobility.
5. Independent Stretch Waistband
Two inches wide and lined with water resistant fabric, the waistband is cut on the bias (diagonally) for stretch and an unrestricted fit. Liner attaches under the waistband for no-gap protection.
6. Padded H-Back Ripcord Suspenders
Suspenders attached to horizontal loops sewn to the top of the waistband so that there is no metal hardware to dig in to your waist or get caught up. H-Back design stays on your shoulder; ripcord hardware allows easy adjustment and quick release. Integral padded shoulder straps.
7. Expansion Cargo Pockets
Two angled full-bellows pockets are a generous 2” X 10” X 8”/10”. They hold a lot, are easier to access below your jacket or when kneeling down, have oversize flaps for coverage when pockets are full, and have an extra layer of shell material to reinforce the lower half for longer wear.
8. Thermally Enhanced Knee
An extra layer of your specified thermal liner and moisture barrier in the liner knee adds padding for comfort and protects this high compression area.
9. Cuff Reinforcement
Cuffs are reinforced with an extra layer of your choice of materials, double-stitched for extended wear.
10. Reverse Boot Cut
Pant legs are 1 inch shorter in the back to avoid premature cuff wear.
11. Liner Access Opening
An access opening in the liner hidden under the front waistband allows you to check out the condition of the moisture barrier and thermal barrier when you need to.
12. Double-Stitched Seams
The strongest double-needle joining seams in the industry with more stitches per inch for longer service life.
13. Flame-Resistant VELCRO® Fastener
VELCRO® fastener is specially treated for flame resistance and attached with quadruple stitching at all primary closures.
14. Reflective Trim and Lettering
We offer a wide choice of trim styles and materials to meet your visibility and identification requirements.
15. Diamond Crotch Gusset
Distributes fabric stress over five double-stitched seams in both the shell and liner.
16. TRIMTRAX™ Thread Protection System
Patented system of abrasion resistant KEVLAR® cording protects the thread securing our reflective trim from abrasion. Lasts longer than conventional trim stitching so maintenance costs are lower and your gear is in service more often.
17. Cairns XPS™: Extension Panel System
This exclusive optional feature allows you to extend the height of REAXTION™ pants by an additional 3” allowing you to wear shorter jackets, maintain generous overlap, and secure the jacket to the pants when you cinch up the belt on your SCBA. The panel uses the same three layers of protection as the pants and suspender attachment loops are sewn to the top of the panel keeping them properly deployed.
18. AXTION™ Liner (Patent Pending)
The liner has darts in both the thermal and moisture barriers corresponding to the added length in the shell provided by the AXTION™ knee. The liner has a reverse boot cut in the back and a concave cut in the front to keep the liner from hanging below the shell and is connected at the cuff with 2 snap tabs for security.
19. Women's Sizes
Available in a full range of patterns designed especially for the female firefighter.
20. Optional SILIZONE™ Foam Knees
Knees can be padded with SILIZONE™ foam padding to make crawling almost heavenly.
|
