All Suspenders above are available with optional reflective trim in red / orange, lime / yellow or silver Scotchlite™, except for the Padded H-back Rip-Cord Suspenders, which are available with red / orange or lime / yellow reflective triple trim only.

For use with RS-1™, 6" and 3" Bib models, and Aegis™. Four suspender button attachments are on the front and 2 on the back Bib. The main body is constructed with 100% cotton webbing. The left and right halves of the suspenders are joined by 10" long, 2" wide horizontal elasticized webbing at the mid-back, forming an "H". On the front, a high-temp thermoplastic loop is attached to the end of the suspender straps on each side. Straps are 2” wide elasticized webbing and are threaded through and folded over the thermoplastic loops. The ends of the elasticized straps are finished with leather suspender button attachments providing 4-way suspension at the front. High-temp thermoplastic slides allow for adjustment of length. (Red only, available in Short, Regular and Long sizes.)

2. H-BACK RIP-CORD SUSPENDERS (For use with RS-1™, 6" and 3" models, and Aegis™)

For use with RS-1™, 6" and 3" Bib models, and Aegis™. These are identical to our regular H-Back Suspenders but also equipped with a specially configured metal slide for smooth adjustments with a quick pull of the Rip-Cord. Release the tension easily by lifting the front tab on the metal slide. (Red only, available in Short, Regular and Long sizes.)

3. REMOVABLE SHOULDER PADS

Designed for use with suspenders but will fit any 2" wide strap like those on a gear bag. The pads are approximately 121/2" long and 61/2" wide, but fold over to 2" in width when attached to a suspender strap. The padding is quilt stitched and lies underneath the strap against the shoulders. 2” wide Velcro® runs the full length of the pads, securing it in place and keeping it from rolling over. (Black only, one size fits all.)

4. SUPER DUTY SUSPENDERS (For use with RS-1 ™ no-bib models)

For use with RS-1™ no-Bib models. Cairns Super Duty Suspenders feature a traditional 8-point design with 4 suspender button attachments on the front and 4 on the back. The body is 100% cotton webbing. The left and right straps join together at mid-back, attaching to a high-temp thermoplastic loop. A 2"X9" elasticized strap is threaded through and folded over the loop. A 2-point leather suspender button harness is attached to each end of the elasticized strap, providing a 4-point attachment at the back. On the front, a high-temp thermoplastic loop is attached to the end of the suspender straps on each side. 9" straps constructed of 2" wide elasticized webbing are threaded through and folded over the thermoplastic loops. The ends of the elasticized straps are finished with leather suspender button attachments providing 4-way suspension at the front. High-temp thermoplastic slides allow for adjustment of length. (Red only, available in Short, Regular and Long sizes.)

5. SUPER DUTY RIP-CORD SUSPENDERS (For use with RS-1 ™ no-bib models)

For use with RS-1™ no-Bib models. These are identical to our Super Duty Suspenders but also equipped with a specially configured metal slide which adjusts with one pull of the Rip-Cord. Release the tension easily by lifting the front tab on the metal slide. (Red only, available in Short, Regular and Long sizes.)

6. PADDED H-BACK RIP-CORD SUSPENDERS (For use with REAXTION™)

Suspenders attach to horizontal loops sewn to the top of the waistband and attach with snaps. H-Back design stays on your shoulder; rip-cord hardware allows easy adjustment and quick release.(Black only, available in Short, Regular and Long sizes)